Please see from our videos below the test we ran to ensure the chiller’s functionality. If running glycol / brewery temps (about 28°F and 40% glycol needed), unit will achieve about 6,000 to 7,000 btu/hr. Since product innovation and improvement is our constant goal, all features and specifications are subject to change without notice or liability. Selection of certain optional features may change listed specifications.
Water-cooled condensers perform the same function as air-cooled condensers, but require two steps, rather than one, to complete heat transfer.First, heat moves from refrigerant vapor into the condenser water. Then the warm condenser water is pumped to a cooling tower where the process heat is ultimately discharged to the atmosphere. The VX040DZV-SP is a custom designed outdoor air cooled chiller with the pump and tank built into the chiller that can be located outside of your facility where space is not a problem. This outdoor packaged chiller is designed to operate all year long in all types of weather and is an ideal way to cool your process while saving valuable floor space in your plant. Chillers are basically a closed system, which utilizes the process of evaporation and condensation to cool the air in a room.
Air-cooled chillers rely on a condenser cooled by the environment air. Thus, air-cooled chillers may find common application in smaller or medium installations where space constraints may exist. An air-cooled chiller can represent the most practical choice in scenarios where water represents a scarce resource. The refrigerant then flows to a compressor, which performs multiple functions.
When the chiller is roof-mounted in new construction, the cost of the support structure can be reduced. In building retrofits, the QTC3 can provide the largest capacity in a given space and existing structure. Designed with a footprint that maximizes installed capacity, the Aermec WWM water-cooled modular chiller features tremendous flexibility. The WWM was designed for the unique needs of New York City’s demanding buildings. It’s compact, flexible, simple to service, energy efficient and compliant with strict energy codes.
This chiller has been refurbished, cleaned, and tested at our shop prior to shipping. It is 230 volt, 3 phase power, scroll compressor, R410a refrigerant, and 45°F+ fluid/glycol “standard” temperature range. Consult with us if 25°F glycol temps needed or if it’s for a brewery. It is outdoor rated and has an insulated tank and a 1.5 hp process pump. We have provided dozens of these units to customers over the years, and they are well-built true workhorses. This never used dual-circuit 6 ton Riedel Chiller is WATER COOLED, not air cooled.
Even though chilled water systems are a new idea to most people, the concept has actually been around since the time of the ancient Romans. In order to cool their buildings, the Romans would run water through the walls to cool the space inside. But that doesn’t mean that the inside of buildings needs to be hot. While the temperature outside can sometimes be over 100 °F, the temperature inside the building can be a comfortable 74 °F. The expansion valve expands the refrigerant from liquid form to gaseous form before it enters the evaporator.
Where chiller space is limited or ambient temperatures are high, air-cooled condensers can be located outdoors, remote from the main chiller, to conserve space or improve condenser performance. However, water cooling involves a higher initial investment, since these systems require both a chiller and a circulating tower system, which in turn will require additional pumps, piping, and tanks. In addition, all water-cooling systems consume significant amounts of water due to evaporation, purging, and bleeding.
Arrived at KIG in July 2015 is this 8 ton Thermal Care AccuChiller Air Cooled Chiller. Unit is 460 Volt, has pump and reservoir, and has been cleaned, refurbished, and tested. Might be different serial number, as we have/had several of the PC160 chillers. Arrived at KIG in October 2020 is a perfect General Air Products 14 ton Air Cooled Chiller.
The QTC3 chiller arrives as a factory-assembled package ready to be installed outdoors, either on the roof or at ground level. The air-cooled condensers eliminate the capital, installation and maintenance costs of a cooling-tower circuit. They are designed to operate in outdoor conditions and used for cold water requirement needed in air conditioning units (Fan Coil, air conditioning plant, etc.) and industrial facilities.
460 Volt, 5 hp Copeland compressor, OUTDOOR rated, and LOW TEMP (28°F fluid temp) capable. Units were run and tested completely at 28°F at our 13,000 square foot facility prior to shipping, and offered with money back guarantee. Arrived at KIG in December 2016 were these two immaculate 2010 Koolant Koolers 3 hp Air Cooled Chillers. Units have stainless cabinet, 3 hp scroll compressor, pump, tank, and loaded with options. We have run the first unit as high as 80°F setpoint, and also down to 28°F glycol temps. These are INDOOR chillers, and were run-off and tested at our 13,000 square foot facility prior to shipping, and offered with money back guarantee.
If you know about chillers, you see the condition of the copper tubes are new, as they should look with virtually zero production hours. Here we have a 2003, 60 ton Carrier HL series chiller which has never been used or connected to power. This is a split system, meaning the chiller is indoors and the remote condenser is mounted outdoors, with field installed refrigerant lines connecting the two.
The report also provides information regarding the recent mergers, acquisitions and partnerships which took place which affects the future growth of the industry. The report also consists material facts and figures regarding the ongoing global crisis of COVID-19 pandemic. The report focuses to provide a deep study on how the market will unfold in the upcoming years, and the factors such as revenue, sales, demand, and supply will change their appearance.